Author |
Message |
mexsip Brekeke Talented
Joined: 26 Apr 2005 Posts: 92
Location: Mexico
|
Posted: Thu Mar 15, 2007 9:05 pm Post subject: rtp issue with pbx 2.0 |
|
|
. Brekeke Product Name and version: pbx 2.0.7.0/217
2. Java version: 1.5.0.10
3. OS type and the version: windows 2003
4. UA (phone), gateway or other hardware/software involved: na
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html : 9 + 5
6. Your problem:
There are a lot of places to configure RTP: ARS, user settings, via dialplan, pbx system settings.
but the only place where is has any effect to change it is in the user configuration.
I made some tests:
calling to ITSP on the Internet using an ARS.
1) user config RTP relay: default
2) ARS -out: RTP-relay: default
result: the sip session page shows RTP relay = OFF, but making a trace on the pbx/sip server showed that the rtp traffic was going through the server. succesfull call.
1) user config RTP relay: default
2) ARS -out: RTP-relay off
3) pbx system setting: RTP relay: on
4) extra dialplan to force rtp=off
result: the sip session page shows RTP relay = OFF, but making a trace on the pbx/sip server showed that the rtp traffic was going through the server. succesfull call.
expectation:
RTP shouldn't go via the pbx/sip server.
1) user config RTP relay: off
2) ARS -out: RTP-relay off
3) extra dialplan to force rtp=off
result: no RTP traffic via the pbx/sip server. succesfull call.
I would expect that the RTP settings in the ARS would override the RTP settings in the user configuration.
Is this a bug or is this as it should work?
thanks in advanced,
Pablo. |
|
Back to top |
|
job Brekeke Addict
Joined: 28 Feb 2007 Posts: 34
|
Posted: Fri Mar 16, 2007 1:43 am Post subject: |
|
|
Hello mexsip
Quote: |
1) user config RTP relay: default
2) ARS -out: RTP-relay off
3) pbx system setting: RTP relay: on
4) extra dialplan to force rtp=off
|
How about ARS-in ?
If you set RTP-relay=off at ARS-in, rtp won't go through PBX.
If you don't have ARS-in and User Setting for caller,
PBX options setting will be applied.
Only when rtp-relay=off for both of in and out,
rtp packets don't go through PBX.
Isn't that cool?
job |
|
Back to top |
|
mexsip Brekeke Talented
Joined: 26 Apr 2005 Posts: 92
Location: Mexico
|
Posted: Fri Mar 16, 2007 8:37 am Post subject: |
|
|
Hello Job,
thanks for your reply.
I created an empty ARS-in with only RTF-relay = off.
rtp user setting: default
ARS-out: RTP-relay off
result: no rtp via pbx server, perfect, as it should be.
I guess this should be something for the manual.
thanks a lot.
Pablo. |
|
Back to top |
|
|